Well you could add a T fitting on your Water source and weld a large venturi effectue Hopper to it, filled with the abrasive. However i think your best course of action is not to see if you can do it but ask yourself if you should.
You maybe have a shitty bidet, or its settings need to be adjusted .
Also there’s a bit of technique - you gotta move around a bit; work the spray around to get everything.
Yes. I only use toilet paper afterwards to dry everything.
I tried that but it just does not clean that well it seems. The toilet paper gets dirty
Try Adding a light abrasive to the Water. You can find bulk sillica at your local bodyshop.
How would that work? I cannot just open it up and put it inside the plumbing
Well you could add a T fitting on your Water source and weld a large venturi effectue Hopper to it, filled with the abrasive. However i think your best course of action is not to see if you can do it but ask yourself if you should.
Wet blasting : https://m.youtube.com/shorts/0y-aE5QoF9E
You maybe have a shitty bidet, or its settings need to be adjusted .
Also there’s a bit of technique - you gotta move around a bit; work the spray around to get everything.
It’s a standalone one
Use your hands and wash with soap. Then use toilet paper to pat dry afterwards. That’s what I do and you can’t get any cleaner than that.
I only do that in severe cases