• ramenshaman@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    4 days ago

    I’m renting, I’m doing the best I can with what I’ve got. The entire unit is inside and I have a huge tube going to a panel in my window. It works surprisingly well.

    • Pup Biru@aussie.zone
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 days ago

      insulate the tube (wrapping towels around it helps), make sure it’s as short as possible for minimal surface area, and properly seal around the window where the interface is : duct tape will work; just make sure there’s no leakage of outside air back in

      that should get you an extra ~2-4C of cooling depending on the size of your space and size of the unit

      also, check all the seals around exterior windows and doors too. sealing up those with various methods (duct tape, draft protection on the underside of doors, etc) can get you another few degrees

      not only does it improve how well the unit works, but it should save you money whenever you heat or cool your house

      • ramenshaman@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        3 days ago

        The unit actually came with an assortment of very helpful insulation accessories. The tube going to the window is double-walled and it came with sheets of adhesive insulating foam for wrapping it up as well as insulating sheets to stick over the window panel. I did end up using tape (not included) to seal the gaps around the window panel. I would highly recommend this unit to other renters.